Specifications

• Model: GM10 NANO V3 GPS w/compass
  
• Dimension: 12mmx17mmx5mm
  
• Weight: 2.6g
  
• Connector: 4pins Pad

Electrical Characteristics

• Chipset: M10050(Tenth Generation Chip)
• Receiving Format: GPS,GLONASS,Galileo,BeiDou,QZSS and SBAS
• Default Protocol: GPS,Galileo,BeiDou
• Frequency: GPS L1,GLONASS L1,BeiDou B1,SBAS L1,Galileo E1
• Channels: 72 Searching Channel

Sensitivity

• Tracking: -162dBm
• Reacquisition: -160dBm

Data and Update Rate

• Support Rate: 4800bps to 921600bps,Default 115200bps
• Data Level: TTL or RS-232,Default TTL level
• Data Protocol: BF4.3.X(UBLOX)/BF4.2.X(NMEA)
• Output frequency: 1Hz-10HzDefault 10Hz

Operational Limits

• Altitude: 50,000m Max
• Velocity: 500m/s Max
• Acceleration: Less than 4g

Power consumption

• VCC: DC Voltage3.3-5V
• Operating temp: -40 °C ~ +85°C
• Storage Temp: -40°C ~ +105°C

Indicator

• PPS LED:yellow .PPS LED not bright when GPS not fixed,flashing when fixed
• The Module’s Pins: RX TX 3.3-5V GND

Includes

• 1x Flywoo GOKU GM10 Nano V3 GPS w/ Compass (10th Gen)
• 1x 150mm Cable
  
• 1x Copper Foil

Wiring Diagram

GPS Rescue Mode Settings 

Note: The chip of GOKU GM10 V3 GPS is M1005. Only BF4.3x version firmware can use Ublox protocol. BF4.2x and earlier firmware can only use NMEA protocol But there is no difference in performance between the two protocols

BETAFLIGHTUse firmware above 4.3.0
INAVUse the latest 6.0.0 configurator, the latest firmware above 5.0.0